Wheel Holder with Deflector Wheel and Small Steel Wheel Set

$171.00

In stock

Description

Wheel Holder with Deflector Wheel and Small Steel Wheel Set

Our all steel, small wheel holder for 2×72 belt grinders, 2” deflector wheel and our set of five (5) small wheels with mounting bolts.

The holder comes with One2″ diameter x 2-1/4″ wide precision CNC lathe turned Delrin deflector Wheel with sealed 6202 bearings.  The bearings fit 1/2″ axle bolts and bolt into our wheel holder.

The wheel holder allows for a 2″ deflector wheel to be attached to assist you in obtaining a tighter radius over the steel rollers.

Our small wheel holder attaches to a 1.5″ x 1.5″ tool arm with a 1/2″-13 threaded bolt and a 3/8″-16 threaded carriage bolt. These holders are powder coated gun metal grey to match our Nexus Grinders.

For our small wheels we use 1018 steel that is CNC lathe machined in Canada. The set of 5 wheels consists of: 1/2″, 5/8″, 3/4″, 7/8″ & 1″ diameter wheels.

We recommend that you reduce your SFPM down to 1800 RPM to ensure that you don’t over spin your bearings which will cause premature bearing failure. We also recommend the use of higher quality belts when using the small wheels. We don’t warranty the bearings as they will eventually fail if used at high rates of speed, however we have lots of replacement bearings should you ever need them in the future.

We also sell square steel tool arms so that you can leave them mounted for quick changes.

Additional information

Weight 2.50 kg
Dimensions 26 × 16.5 × 16.5 cm