Wheel Holder, Small Steel Wheel Set and Tool Arm

$156.00

Description

Wheel Holder, Small Steel Wheel Set and Tool Arm

Our all steel, small wheel holder for 2×72 belt grinders and our set of five (5) small wheels with mounting bolts. The wheel holder allows for a 2″ deflector wheel to be attached to assist you in obtaining a tighter radius over the steel rollers.

Our small wheel holder attaches to a 1.5″ x 1.5″ tool arm (included) with a 1/2″-13 threaded bolt and a 3/8″-16 threaded carriage bolt. These holders are powder coated gun metal grey to match our Nexus Grinders.

For our small wheels we use 1018 steel that is CNC lathe machined in Canada. The set of 5 wheels consists of: 1/2″, 5/8″, 3/4″, 7/8″ & 1″ diameter wheels.

We recommend that you reduce your SFPM down to 1800 RPM to ensure that you don’t over spin your bearings which will cause premature bearing failure. We also recommend the use of higher quality belts when using the small wheels. We don’t warranty the bearings as they will eventually fail if used at high rates of speed, however we have lots of replacement bearings should you ever need them in the future.

Additional information

Weight 3.700 kg
Dimensions 47.5 × 16.5 × 11.5 cm