Two – 9″ Aluminum Disks – Beveled & Flat

$245.00

Flat 9″ grinding disk
Beveled 9″ grinding disk

In stock

Description

Our Nexus 9″ aluminum disks for disk grinders are CNC lathed from solid billet 6061-T6 Aluminum and made in Canada exclusively for Nexus Grinders.

One Disk – Beveled Face 1 degree
9″ diameter precision CNC lathe turned aluminum disk for disk grinders.
Accepts standard 9″ x 11″ sheet of abrasive or standard pre-manufactured grit disks.
The set screw (included) is 1/4-20 & 1/2″ long.
The bore of this 9″ disk is 5/8″ and has a 3/16″standard key way.
The face is Beveled 1 degree, which allows you to use grind a blade on one side of the disk and not catch the opposite side of the disk when grinding or sharpening.

One Disk – Flat Face
9″ diameter precision CNC lathe turned aluminum disk for disk grinders.
Accepts standard 9″ x 11″ sheet of abrasive or standard pre-manufactured grit disks.
The set screw (included) is 1/4-20 & 1/2″ long.
The bore of this 9″ disk is 5/8″ and has a 3/16″standard key way.

We recommend using a 1800 rpm motor.  For the best results, a Variable Frequency Drive (VFD) and 3 phase 1 hp motor be used with forward and reverse switch.

We sell 9″ x 11″ Wet/Dry sandpaper sheets that you can apply adhesive to and then trim to fit.
We also sell VSM KP911S Aluminum Oxide PSA (pressure sensitive adhesive) disks that you can quickly apply and re-apply a few times.

Additional information

Weight 4.160 kg
Dimensions 26 × 26 × 19 cm

You may also like…