Start your homebuilt grinder project off with our steel D-Plate. These are discounted for a quick sale.
Our D-shaped plate was designed for deep slack belt grinding. The plate is CNC cut from 3/8″ steel. 1/8″ steel spacer is also included.
Wheel mounting holes are 1/2″-13 accurately tapped. The center mounting hole is 1/2″ diameter, the slots for a flat platen mounting bracket are 1/4″ wide and 6″ apart, the u-shaped adjusting slot accepts a 3/8″ bolt. The axle holes are 10.5″ center to center and will accept an 8″ long steel platen if you use 2″ diameter wheels.