Description
Cable, 2 Switches and Stain Relief Kit for VFD
This pre-wire kit will allow you to connect your Variable Frequency Drive (VFD) to your 3 phase motor and power supply with wire, switches and strain reliefs.
Included in the kit:
Forward/Reverse Switch
On/Off Line Switch
10 feet of 12/3 SJOOW conductor wire rated at 300 volts and 25 amps
4 feet of 16/4 SJOOW conductor wire rated at 300 volts and 10 amps
3 (three) 1/2″ Strain relief fittings with washer and nut (fits 0.25″ to 0.47″ cable)
This kit will fit the following models: KBAC-24D, KBAC-27D, KBAC-29 (1P)
This switch kit is made in-house and meets or exceeds the quality of KB Electronic parts
Installation instructions with diagrams and/or pictures for both switches and strain reliefs are provided.
For technical information on the wire see table below.
16/4 AWG Specs
12/3 AWG Specs
