Our Nexus 9″ aluminum disks for disk grinders are CNC lathed from solid billet 6061-T6 Aluminum and made in Canada exclusively by Nexus Grinders.
One Disk – Beveled Face 1 degree
9″ diameter precision CNC lathe turned aluminum disk for disk grinders.
Accepts standard 9″ x 11″ sheet of abrasive or standard pre-manufactured grit disks.
The set screw (included) is 1/4-20 & 1/2″ long.
The bore of this 9″ disk is 5/8″ and has a 3/16″standard key way.
The face is Beveled 1 degree, which allows you to use grind a blade on one side of the disk and not catch the opposite side of the disk when grinding or sharpening.
VSM Starter package contains twenty (20) KP911S 9″ Pressure Sensitive Adhesive (PSA) disks, with the following grits:
2 x 60 Grit
2 x 80 Grit
2 x 120 Grit
2 x 180 Grit
3 x 220 Grit
3 x 320 Grit
3 x 400 Grit
3 x 600 Grit
General purpose for grinding metal, non-ferrous metals, wood, and plastic. Maximum working speed 40 m/s.
Abrasive thickness 540 FK (F paper, 40 to 180 grit) to thickness 544 C3K (240 − 400 grit, stearate coated) with high strength and dense distribution. High removal rates due to specially treated abrasive grit
We sell 9″ x 11″ Wet/Dry sandpaper sheets that you can apply adhesive to and then trim to fit.
We recommend using a 1800 rpm motor. For the best results, a Variable Frequency Drive (VFD) and 3 phase 1 hp motor be used with forward and reverse switch to control your speed and direction.