9″ Aluminum Disk


9" Aluminum Disk

9″ Aluminum Disk

SKU: N/A Category:


9″ Aluminum Disk

Our Nexus 9″ aluminum disks for disk grinders are CNC lathed from solid billet 6061-T6 Aluminum and made in Canada exclusively for Nexus Grinders.

Beveled Face 1 degree or Flat Face (no bevel)
9″ diameter precision CNC lathe turned aluminum disk for disk grinders.
Accepts standard 9″ x 11″ sheet of abrasive or standard pre-manufactured grit disks.
The set screw (included) is 1/4-20 & 1/2″ long.
The bore of this 9″ disk is 5/8″ and has a 3/16″standard key way.

Note: The Beveled 1 degree disk
, allows you to use grind a blade on one side of the disk and not catch the opposite side of the disk when grinding or sharpening.

We recommend using a 1800 rpm motor.  For the best results, a Variable Frequency Drive (VFD) and 3 phase 1 hp motor be used with forward and reverse switch.

We sell 9″ x 11″ Wet/Dry sandpaper sheets that you can apply adhesive to and then trim to fit.
We also sell VSM KP911S Aluminum Oxide PSA (pressure sensitive adhesive) disks that you can quickly apply and re-apply a few times.

Additional information

9" Aluminum Disk

Beveled, Flat

You may also like…