Description
1095 High Carbon Steel
Note: All steel is sold by the foot. When picking the quantity of 2, equals a 2 foot bar. Our steel bars come in 4 foot lengths (CPM steels are in 3 foot lengths). Please provide your cutting instructions in the shopping cart left of the total price in the box “Special instructions for seller”.
If you do not provide specific cutting instructions and order a 4 foot length or more (6,8,10,12 feet etc.), then all bars will be cut in half into multiple 2 foot lengths.
3 foot length order will ship in 3 foot lengths.
5 foot order will be shipped in a 2 foot and 3 foot length in a 3 foot box.
Any bars over 3 feet are very expensive to ship and will be cut to fit in a 2 or 3 foot box.
1095 A favorite steel for many knife makers and enthusiasts, our 1095 has earned a respected reputation as being excellent for forging, grinding, and taking a wonderful edge.
Overall, 1095 does prove to be a little more difficult to heat treat for some makers as it is hyper-eutectoid and best used with an accurate means of reading temperature and a fast quench oil (we recommend Parks 50).
Those that have mastered heat treating 1095, however, have produced some of the most beautiful hamons.
While it may seem a little pricey, our 1095 is the best in the industry hands down due to the fact it provides easily predicted results each time, every time.
Like most of our steels it is pickled and annealed, so it arrives to you ready to go whether you use it in Damascus or grind out a quick kitchen knife.
Like all high carbon steels, rust or stains can happen, be sure to inform your customers they’ll need to use good maintenance so as to not ruin the finish or to allow a natural patina to form over time, especially kitchen cutlery.